This product is designed for use in properly balanced pool water.

NO PHOS™ 2000 Phosphate Remover is an effective and reliable product for phosphate removal using your existing filtration.

SHAKE WELL BEFORE USE!

DIRECTIONS FOR USE:

Weekly: Use 4 oz of NO PHOS™ 2000 Phosphate Remover per 10,000 gal. of pool water to maintain phosphate levels below 125 ppb (parts per billion)

Initial high-phosphate treatment:

1. First, clean or backwash the filter.
2. Calculate the amount of product required using the dosage guide provded.
3. Pour No Phos™ 2000 in the pool while the filter system is running, distributing it over as wide an area as possible.
4. Run your filter system continuously for at least 24 hours.
5. If filter pressure increases 10 psi over normal, clean or backwash the filter.
6. After 24 hours test the phosphate level with phosphate test kit approved for swimming pool use.
7. If it is needed, reapply NO PHOS™ 2000 Phosphate Remover.

NOTE: It is normal for NO PHOS 2000 Phosphate Remover to cause pool cloudiness as this means that the product is removing phosphates on contact.

To clear the water quickly use AFFINITY™ EASY™ NATURAL CLARIFIER.

DOSAGE:
Using the chart on the bottle helps accomplish proper phosphate removal.

Example: For a 10,000-gallon pool with 250 ppb phosphates, use 4 oz of NO PHOS 2000.